The main advantages of galvanized C-profile

Zinc-plated C-shaped steel refers to a new type of steel that uses high-strength steel plate, after cold bending and roll forming, has uniform wall thickness, excellent cross-section performance, high strength, and can save 30% of material with the same strength compared with traditional hot rolling.l Profile steel Manufacturer

The galvanized C-shaped steel has the advantages of adjustable size and high compressive strength. The cold-formed profiled steel is light in weight, but it is in line with the force characteristics of the roofing stringer, so that the mechanical properties of the steel can be utilized by the light. A variety of accessories can be connected into different combinations, beautiful appearance, the use of steel beams, can reduce the weight of building roof, reduce the amount of steel used in engineering, so it is called cost-effective steel, is the replacement of traditional steel such as angle steel, channel steel, steel pipe New construction materials for the purlins.

The main advantages of galvanized C-profile

The main advantages of galvanized C-profile are:

1.Good reliability.

2.sexual protection: each part can be plated with zinc, protected.

3.the toughness of the coating: can withstand mechanical damage during transportation and use.

4.Durable: In the urban area or offshore area, the standard hot-dip galvanized anti-rust layer can be used for 20 years; in the suburbs, it can be used for more than 50 years.

5.Low cost: The galvanizing is more expensive than painting, but in the long run, the cost of galvanizing is low, because galvanizing is durable and durable. time and effort: the galvanizing process is faster than other coating construction methods, and can avoid the time required to paint on the construction site after installation.

Scope of application

Galvanized C-shaped steel is widely used in purlins and wall beams of steel structures, and can also be combined into lightweight building trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light manufacturing.z profile

Solar energy is a renewable new energy source

As we continue to develop new energy industries, we are paying attention to the development and utilization of various new energy sources. Solar energy is a renewable new energy source. It is currently the most important type of new energy, and the photovoltaic support is also followed. Appeared and continuously developed, the photovoltaic support as its name suggests has played a certain supporting role, of course, this is not a simple bracket, but has a high technical, quality, material requirements.Steel Profile suppliers

The purpose of the photovoltaic bracket is to be able to support the fixing and placement of the position of the solar panel, so the material requirements are very important, so many aspects must be considered in the manufacturing process, such as whether it can resist outdoor changes. Whether the weather factor can still function normally in storms or blizzards, whether it can withstand the effects of thunder in thunderstorms, whether it can last for at least 30 years, etc. These are all manufactured. The problem that must be considered when the photovoltaic support is due to the large demand, the process of developing the photovoltaic support is very long, and it takes a lot of manpower and material resources.

Solar energy is a renewable new energy source

This also requires a number of factors to be considered in the use of photovoltaic supports, including the climatic factors to use the location of the photovoltaic support, whether it is rainy, snowy, cold weather, or hot weather, etc., which are necessary in the process of selecting and using. In consideration, only the choice of suitable, safe, and relatively strong, can guarantee the age. Furthermore, the installation of photovoltaic supports is also a problem. During the installation process, it is required to select the best position, which can adapt to different sunlight requirements and facilitate movement, so as to better function.

Before the PV rack is installed, there are many inspection processes and prepared professionals who should understand these issues when installing. First, there are many manufacturers of PV racks, they should choose the local soil environment, or It is a photovoltaic support for some environmental climates. When testing the test items, it is very good to test its appearance and its anti-corrosion coating. It should ensure that these coatings are in good condition and are designed in terms of model specifications and materials. When designing accessories, or some other equipment, it should be very complete, including bolts or some other materials,z profile steel ,according to the relevant provisions of steel structure construction, he will be able to achieve Relevant specification requirements.

The photovoltaic bracket should not be subjected to a forced blow during the installation process, which may cause certain damage to the entire equipment. During the installation of the bracket, its anti-corrosion layer should not be destroyed, because it will play a very important role in the later process. The role of the bracket angle setting, should pay attention to its angle, should be set in a reasonable position, so that it can be very good reception with the sun, the centerline deviation should also be within the specified range, and the vertical deviation The angle, or the whole field of the top level of the bracket should be set, which may bring better results in the later work process.

Moreover, during the process of on-site photovoltaic support construction, the installation of photovoltaic supports requires professional operators to operate. They may stand at the angle of these supports or their position and yaw angle calculations. Consider these issues from a more professional perspective, so you must be able to pay attention to these issues, and you should take some measures to ensure that the correctness of the process and sequence during the installation process is done in bracket installation or bolting. In the process, there are other aspects of the strength and related requirements.

Photovoltaic effect

“Photovoltaic effect”, Refers to the phenomenon that light causes a potential difference between different parts of the semiconductor or semiconductor to which the semiconductor is bonded. It is first the process of converting photons (light waves) into electrons and converting light energy into electrical energy; secondly, it is the process of forming voltage. With voltage, it is like building a dam. If the two are connected, a circuit of current will be formed.Steel Profile suppliers

Photovoltaic power generation is a technology that directly converts light energy into electrical energy by utilizing the photovoltaic effect of the semiconductor interface. The key component of this technology is the solar cell. The solar cells are packaged and protected in series to form a large-area solar cell module, and then combined with a power controller and the like to form a photovoltaic power generation device. The advantage of photovoltaic power generation is that it is less restricted by geographical area, because the sun shines on the earth; the photovoltaic system also has the advantages of safe and reliable, no noise, low pollution, no need to consume fuel and erecting transmission lines to generate electricity on site and short construction period. The photovoltaic effect is referred to as the photovoltaic effect, which refers to the phenomenon that light causes a potential difference between a heterogeneous semiconductor or a different portion of a semiconductor and a metal combination.

z profile

Photovoltaic effect refers to the phenomenon that light causes a potential difference between a heterogeneous semiconductor or a different portion where a semiconductor and a metal are combined. It is first the process of converting photons (light waves) into electrons and converting light energy into electrical energy; secondly, it is the process of forming voltage. With voltage, it is like building a dam. If the two are connected, a circuit of current will be formed.

When the P-N junction is illuminated, the intrinsic and extrinsic absorption of the photon by the sample will produce photogenerated carriers (electron-hole pairs). However, only the minority carriers excited by the intrinsic absorption can be caused by the photovoltaic effect. Due to the photogenerated holes generated in the P region, the photogenerated electrons generated in the N region are multi-sub States, and are blocked by the barrier and cannot be over-knotted. Only the photogenerated electrons of the P region and the photogenerated holes of the N region and the electron hole pairs (small children) of the junction region can drift over the junction under the built-in electric field when diffused to the vicinity of the junction electric field. The photogenerated electrons are pulled toward the N region, and the photogenerated holes are pulled toward the P region, that is, the electron hole pairs are separated by the built-in electric field. This results in the accumulation of photogenerated electrons near the boundary of the N region and the accumulation of photogenerated holes near the boundary of the P region. z profile

They produce a photogenerated electric field that is opposite to the direction of the built-in electric field of the thermally balanced P-N junction, with the direction from the P region to the N region. This electric field lowers the barrier, and the amount of decrease is the photo-generated potential difference. The P-terminal is positive and the N-terminal is negative. At this time, the Fermi level is separated, thereby generating a voltage drop, and electrodes are applied on both sides of the silicon wafer and connected to the voltmeter. For crystalline silicon solar cells, the typical value of the open circuit voltage is 0.5 to 0.6V. The more electron-hole pairs that are produced by the illumination at the interface layer, the greater the current. The more light energy absorbed by the interface layer, the larger the cell area of ​​the interface layer, and the greater the current formed in the solar cell.

The functions of solar photovoltaic support equipment steel should have

In the solar photovoltaic power generation system, the main characteristics of the photovoltaic support are not known. In the formation of the cost of all systems, solar photovoltaic brackets account for about 10% of the total system cost. The photovoltaic support equipment is a special support for the placement, installation and solid solar panel planning in the solar photovoltaic power generation system. The normal material is aluminum alloy and stainless steel.Steel Profile Manufacturers

The functions of solar photovoltaic support equipment steel should have

The photovoltaic support has strict requirements for steel functions, and the solar photovoltaic support equipment steel should have the following functions:

1.plasticity, toughness and fatigue resistance. A better press can cause a large deformation of the structure before it is damaged, so that people can invent and take compensation in real time. Better plasticity can also adjust the peak stress of the department. The self-solar solar panel device often adopts a forcing device for the adjustment angle, and the plastic machine can make the internal force redistribution of the structure, so that the stress of some inherent stress concentration parts in the structure or component tends to Uniform, progressively constructed group carrying capacity. A better tough machine can make the structure receive more energy when it is damaged under the external force impact load, especially the Gobi power station and the roof power station with large wind power, the wind vibration effect is remarkable, and the steel toughness can invalidate the damage level. Better fatigue resistance also enables the structure to have a stronger ability to withstand the repeated wind loads of the melon generation.

2.processing capabilities. Sophisticated processing machines include cold working, thermal processing and weldability. The steel used in photovoltaic steel construction is easy to process into various types of structures and components, and it is also necessary that these structures and components are not affected by the formation of strength, plasticity, toughness and excessive fatigue resistance.

3.tensile strength and yield point. The high yield point can reduce the section of the steel member, increase the weight of the structure, diligently divert the steel, and reduce the cost of the group name. The high tensile strength can increase the safety of the constructed group and improve the reliability of the structure.Omega Profile

4.the application life. Because the planned application life of solar photovoltaic systems is more than 20 years, the excellent anti-corrosion function is also the main indicator to balance the advantages and disadvantages of the bracket system. If the life of the stent is short, it will inevitably affect the stability of all structures, resulting in an extension of the investment recovery period and a decline in all target economic benefits.

5.Under the above premise, the steel for photovoltaic steel construction should also be easy to purchase and produce, although the price concessions are also very important.


Photovoltaic power generation is environmental protection or pollution

In recent years, China’s PV installed capacity has continued to expand and has become the world’s largest application market. However, at the same time of breakthroughs in development, z profile the problems of power cuts and overcapacity have become the bottleneck of industry development for many years. So is the current situation of abandoned light and power still still? What are the hardest hit areas that have abandoned light and electricity?

Photovoltaic power generation is environmental protection or pollution?

Photovoltaic power generation is environmental protection or pollution

Photovoltaic power generation “abandonment of light” means the amount of electricity generated by a photovoltaic power station, exceeding the maximum transmission capacity of the power system and the amount of power consumed by the load. Coexisting with the abandoned light is “limited power”, which limits the power output. The higher the light rejection rate, the lower the utilization rate of photovoltaic power generation. The reporter learned that in 2017, the average light rejection rate of the five northwestern provinces was 14.1%, far higher than the national average of 6%, while in 2015 and 2016, the figure exceeded 30%. Many PV companies in the Northwest region participate in the bidding transaction of the local power grid, and use the way of bidding below the market price to obtain the power transmission indicators to reduce the light rejection rate. The reporter learned that in 2015 and 2016, the newly installed PV installed capacity in the five northwestern provinces was 6.08 million kWh and 9.43 million kWh, accounting for 40% and 28% of the country. At this time, the construction speed of the power grid in the northwest region lags far behind the new installed capacity.

In addition, the laying of UHV lines is also costly. According to calculations, 100 kilometers of transmission lines are laid, and the investment cost needs to be 1.25 billion yuan. According to industry insiders, “abandonment of light” is mainly due to the limited transmission capacity of the power grid, which cannot be connected to the grid after the power station is built. The ability to absorb local energy in the northwest region is weak, and the power transmission capacity of the power grid has not kept up with the construction speed of photovoltaic power plants. Therefore, it is difficult to significantly change the phenomenon of “disposal of light”. The data shows that in 2017, the photovoltaic power generation in the northwest region was 39.286 billion kWh, an increase of 37.81% year-on-year, while the annual electricity consumption including delivery was only

In fact, for photovoltaic power plants in the northwest, in addition to overcapacity and nowhere to transport, a key issue at present is that the local grid size does not have the capacity to support 10 million kilowatts of photovoltaic power. So, is there a way to turn photoelectricity into stable power to ensure its safe delivery? The reporter found that the “storage power station” may become the key to solving this problem.

A Motorized Scooter Will Make Your Life Easier

The 2010 Paris Motor Show featured various interesting fashions, presenting the most recent autos offered by European, Asian and American manufacturers as well as several concept designs. These embody Brake Energy Regeneration, electrical coolant pumps operating on demand, and the quantity flow-managed oil pump additional optimising the stability of load performance and gas consumption. From its title, you possibly can inform this is essentially the most transportable folding electrical scooter. At present’s electrical scooters are transportable designs that do not compromise on pace.

Speedways Mini 4 Pro is a high-of-the-line electrical foldable scooter. Segway Ninebot ES4 is a high-performance electric folding scooter. Each electrical and gasoline scooters can help you retain cash in your pocket. Inokim is a leading producer of sunshine and foldable electrical scooters. Wheel chairs are put to disgrace after motorized scooters have come to existence. Three variations of the Mini Scooter E Idea have been on show in Paris, scooters most definitely to hit the auto show circuit and present up stateside at a number of well-liked shows together with Los Angeles, Detroit, Chicago and New York.

For grownup commuters who wish to save on gasoline costs, a motor scooter is one possibility. Touring round on a motorized scooter, whether a quick gas scooter or a balanced and dependable disability scooter, is downright thrilling. It is a crane-like structure with a line that lifts the mobility scooters up and swings it into the automotive’s trunk, and then lowers it into the trunk. The low supply and rising price of electrical energy has made the fuel scooters standard.These sorts of mopeds are very mild in weight as they are not accessorized with the heavy electrical mopeds are additionally working and working on the road but in much less number as in comparison with the gas mopeds.8 inch mini electric scooter portable foldable for adult

This means altering oil regularly, allowing your scooter to heat up earlier than riding, conditioning your engine, to name just some. Electrical mopeds, electric bicycles and fuel powered scooters can scale back using fuel and climate change. But one of the best cause to own a fuel motor scooter or an electric scooter may be very easy: they are fun and thrilling. The Mini Scooter E Concept is turning heads for a number of causes: it is an all-electric bike, features a wonderful up to date design and it is being proposed by a model finest identified for selling stylish UK-styled automobiles.

It pairs easily via Bluetooth such that you could view the remaining battery power, present velocity, your riding habits, and different driving statistics. Folding scooters might be driven to work and then stashed below a desk or in a closet. All electrical, battery, and charging methods are examined and licensed to UL 2272 security standards for 2 wheel self-balancing scooters. IZIP Fusion NuVinci CVP The iZIP Fusion NuVinci CVP Drive electric scooter delivers a totally distinctive using experience with it’s incorporation of cutting-edge CVP (constantly variable planetary) know-how.

For an upscale, excessive-quality electric scooter, Speedway IV Professional is your greatest bet at attaining quick and secure cruising speeds. Given its pace, energy, weight and reliability, both the newbie and skilled rider can appreciate its performance. We’ve scanned the market and come up with the Greatest Foldable Electric Scooter. Electrical scooters are a handy approach to cruise quick distances.

The brand new twelve-cylinder models in the BMW 7-Series again characteristic a variety of technologies for minimal gasoline consumption and emissions primarily based on BMW’s strategy of EfficientDynamics. The scooter has a rear engine from its early days on which the seats and the fuel tank was made and in addition a foot rest so as to make sure straightforward and cozy sitting on the scooter.

It makes use of a lithium-ion battery that is installed inside the rear wheel. Better still, it has a 250W motor that’s powered by 188Wh lithium battery. When deciding upon the perfect electric scooters, potential consumers base their evaluations on varying elements. The scooters have been being designed keeping the consolation of girls within the mind, as a result of previously, it was thought that a girl can’t sit by maintaining the legs throughout the seats of the motorbike.

Galvanized C profile steel

The galvanized C profile steel is adjustable in size when used, and has a certain degree of compressive strength. To some extent, the cold-formed steel has a face size that is light and, to a certain extent, conforms to the roof.c purlin manufacturer

The force characteristics of the purlins enable the mechanical properties of the steel to be utilized by the light. A variety of accessories can be connected into different combinations, beautiful appearance, the use of steel beams, can reduce the weight of building roof, reduce the amount of steel used in engineering, so it is called cost-effective steel, is the replacement of traditional steel such as angle steel, channel steel, steel pipe New construction materials for the purlins.

Galvanized c purlin steel

Galvanized C profile steel is widely used in purlins and wall beams of steel structures, and can also be combined into lightweight building trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light manufacturing.

Zinc-plated C profile steel has uniform zinc layer, smooth surface, strong adhesion and high dimensional accuracy. All surfaces are covered by zinc layer. The surface zinc content is usually 120-275g/m2. The service life is long, corrosion-resistant and durable. The most powerful type of galvanized C profile steel is high.

The galvanized c-shaped steel is automatically machined from a C profile steel forming machine. C-beam forming machine can automatically complete the forming process of C profile steel according to the given C profile steel size. Discharge 1 – Leveling 2 – Forming – Forming 4 – Straightening 5 – Measuring length 6 – punching rib round hole 7 – punching elliptical connecting hole 8 – forming cutting 9 galvanizing C profile steel here

C profile steel is formed by cold-bending of hot-rolled strips, with thin wall and light weight, excellent cross-section performance and high strength. Compared with traditional channel steel, the same strength can save 30% of materials. Fastened by bolts, the installation is quick and easy, and the problems of thermal expansion and contraction are well solved.

The galvanized C profile steel is made of high-quality Q235 hot-rolled strip, with a galvanizing capacity of 250g. It is stronger than ordinary C profile steel and has better corrosion resistance. The service life under the same conditions is more than twice that of ordinary C profile steel.

spiral welded pipe Longitudinal superior

Allice S Lee is from hunan great steel pipe co.,ltd, which is is specialised in metal products manufacturing, steel merchandise( seamless steel pipe and erw steel pipe )stocking and real estate developing. A lot of this has to do with the components which are placed into the steel throughout production, steel strip supplier resembling carbon or manganese. Used within the production of a variety of cold rolled merchandise, together with CR, GI, coloration coated panels.

When the metal tube welds are subjected to X-ray industrial television or X-ray movie inspection, the inspection of the 20-50mm base materials on both edges of the weld is strengthened. Steelpipes has an enviable status constructed on responsiveness, flexibility, Stainless Steel Strip data and ease of doing business. Metal plate A36 is stocked in all sample sizes as much as 96″ x 288″ and might be processed to particular shapes per print.

With a view to deepen the scope of the analysis, the report also tracks milestone developments and regulations that have formed the Stainless Metal Heating Plate market to date. It was thus confirmed, spiral welded pipe Longitudinal superior plastic deformation, blasting the mouth is generally confined to within a pitch, 4×4 square tubing which is spiral weld for expansion hole played a powerful role in binding due.

the surface of the steel sheets

So as to find the high quality metal suppliers that may provide the correct metal prices and then getting the long cooperation, the web marking is turn out to be necessary, these days, more and more companies personal their website of metal to advertise their metal services, Sino East Steel by way of these methods, for many metal demanders, they’ll get whole details about latest steel market.

Causal evaluation outcomes of steel pipe scrap present that the principle elements that affect the standard of uncooked materials are the mechanical properties of metal strip instability, steel strip floor defects and large geometric deviation of the three elements, due to this fact, ought to give attention to control from these three features. After the method is over, lighten the strain from the machine and slowly take away the drill bit from the surface of the steel sheets.

For example, the output carriage outfitted with a water cooling system to speed up cooling, which permits using low alloy composition to achieve the specific depth degree and low temperature toughness to enhance the weldability of the metal. It was decided that affect the floor roughness of the tube wall plays than the native uplift of the area (similar to a spiral or longitudinal seam weld, and even contains an internal circumferential weld) on ten times performed.

the pipeline steel is rolled steel plate

Steel coil scale is principally used on metal coil packing and transporting line and processing line. The sum of the three effects on the standard of steel pipe merchandise accounts for 80.01%. In the remainder of Europe stress piping makes use of the identical pipe IDs and wall thicknesses as Nominal Pipe Size , but labels them with a metric Diameter Nominal (DN) as an alternative of the imperial NPS.Home Textiles Manufacturers

In the course of use, the principle stress course of the steel pipe with large-diameter straight-slit metal pipe for piling, the equal defect length of the large-diameter straight seam metal pipe within the axial direction of the pile is smaller than that of the straight seam pipe; secondly, because the pipeline steel is rolled steel plate, the affect The toughness has a big anisotropy, and the CVN value in the rolling direction may be thrice higher than the CVN value perpendicular to the rolling direction.