As we continue to develop new energy industries, we are paying attention to the development and utilization of various new energy sources. Solar energy is a renewable new energy source. It is currently the most important type of new energy, and the photovoltaic support is also followed. Appeared and continuously developed, the photovoltaic support as its name suggests has played a certain supporting role, of course, this is not a simple bracket, but has a high technical, quality, material requirements.Steel Profile suppliers
The purpose of the photovoltaic bracket is to be able to support the fixing and placement of the position of the solar panel, so the material requirements are very important, so many aspects must be considered in the manufacturing process, such as whether it can resist outdoor changes. Whether the weather factor can still function normally in storms or blizzards, whether it can withstand the effects of thunder in thunderstorms, whether it can last for at least 30 years, etc. These are all manufactured. The problem that must be considered when the photovoltaic support is due to the large demand, the process of developing the photovoltaic support is very long, and it takes a lot of manpower and material resources.
This also requires a number of factors to be considered in the use of photovoltaic supports, including the climatic factors to use the location of the photovoltaic support, whether it is rainy, snowy, cold weather, or hot weather, etc., which are necessary in the process of selecting and using. In consideration, only the choice of suitable, safe, and relatively strong, can guarantee the age. Furthermore, the installation of photovoltaic supports is also a problem. During the installation process, it is required to select the best position, which can adapt to different sunlight requirements and facilitate movement, so as to better function.
Before the PV rack is installed, there are many inspection processes and prepared professionals who should understand these issues when installing. First, there are many manufacturers of PV racks, they should choose the local soil environment, or It is a photovoltaic support for some environmental climates. When testing the test items, it is very good to test its appearance and its anti-corrosion coating. It should ensure that these coatings are in good condition and are designed in terms of model specifications and materials. When designing accessories, or some other equipment, it should be very complete, including bolts or some other materials,z profile steel ,according to the relevant provisions of steel structure construction, he will be able to achieve Relevant specification requirements.
The photovoltaic bracket should not be subjected to a forced blow during the installation process, which may cause certain damage to the entire equipment. During the installation of the bracket, its anti-corrosion layer should not be destroyed, because it will play a very important role in the later process. The role of the bracket angle setting, should pay attention to its angle, should be set in a reasonable position, so that it can be very good reception with the sun, the centerline deviation should also be within the specified range, and the vertical deviation The angle, or the whole field of the top level of the bracket should be set, which may bring better results in the later work process.
Moreover, during the process of on-site photovoltaic support construction, the installation of photovoltaic supports requires professional operators to operate. They may stand at the angle of these supports or their position and yaw angle calculations. Consider these issues from a more professional perspective, so you must be able to pay attention to these issues, and you should take some measures to ensure that the correctness of the process and sequence during the installation process is done in bracket installation or bolting. In the process, there are other aspects of the strength and related requirements.